To Next PageTo Next PageWhat to do if the unit or remote operation key is not functioning on Toshiba TV DVD Combo?
If the unit or remote operation key is not functioning on your Toshiba TV DVD Combo, turn off the unit and unplug the AC power cord for several minutes, then replug it to reset the system.
How to fix no CATV reception on Toshiba MD13Q42?
If you're not getting any CATV reception on your Toshiba TV DVD Combo, check all the cable TV connections to ensure they are secure. Make sure the TV/CABLE selection is set to the CABLE position. If the issue persists, try another station in case there are problems with the current station or cable TV system.
Why does the picture wobble or drift on my Toshiba MD13Q42 TV DVD Combo?
If the picture on your Toshiba TV DVD Combo wobbles or drifts, try tuning to another station as the current station or cable TV provider may be experiencing problems. Make sure channels are set into memory. Check your antenna or cable TV connections and reorient the antenna. Note that if the cable TV company is scrambling the signal, this can also cause picture wobbling or drifting.
How to fix poor color or no color on Toshiba MD13Q42?
If your Toshiba TV DVD Combo has poor or no color, try tuning to another station to rule out issues with the broadcast. Ensure that your channels are properly set into memory. Check the picture control adjustments, and inspect the antenna or cable TV connections, reorienting the antenna if necessary. Also, check for any sources of possible interference.
Why is the reception poor on some channels on my Toshiba MD13Q42?
If you're experiencing poor reception on some channels with your Toshiba TV DVD Combo, it could be due to the station or cable TV provider experiencing problems, so try tuning to another station. If the station signal is weak, reorient your antenna to better receive it. Additionally, check for any sources of possible interference.
What to do if my Toshiba MD13Q42 TV DVD Combo has poor picture or no picture?
If your Toshiba TV DVD Combo has poor or no picture, try tuning to another station in case the current station or cable TV provider is experiencing problems. Check the antenna or cable TV connections and reorient the antenna. Also, check for any sources of possible interference and verify the picture control adjustments.
Why is there poor sound or no sound on my Toshiba MD13Q42 TV DVD Combo?
If you are experiencing poor or no sound on your Toshiba TV DVD Combo, try tuning to another station, as the station or cable TV provider might be experiencing problems. Also, check your volume adjustments and make sure there are no sources of interference nearby.
How to troubleshoot Toshiba TV DVD Combo that does not operate?
If your Toshiba TV/DVD combo does not operate, ensure the power cord is properly plugged in. If it is, try using a different AC outlet. Also, check the fuse or circuit breaker to ensure power is available. As a last resort, unplug the unit and then plug it back in.
Why is the remote control not functioning on my Toshiba MD13Q42 TV DVD Combo?
If the remote control for your Toshiba TV DVD Combo is not functioning, aim the remote control directly at the remote sensor on the unit. Operate the remote within approximately 5 meters, and reduce the amount of light in the room. Clear any obstructions in the path of the beam. If the batteries are weak, replace them, and ensure they are inserted correctly.
General| Screen Size | 13 inches |
|---|---|
| Display Type | CRT |
| DVD Player | Yes |
| Aspect Ratio | 4:3 |
| Audio Output | Stereo |
| Outputs | Headphone Jack |
| Built-in Speakers | Yes |
| DVD Formats Supported | DVD, CD, CD-R, CD-RW |
| Power Source | AC |
| Inputs | Composite video |
Warnings and precautions for safe operation of the appliance.
Safety recommendations for child use and TV placement.
Connecting VHF/UHF and combination antennas to the unit.
Initial setup procedures like language and channel tuning.
How to operate the TV functions like volume and channels.
Automatic channel scanning and memory tuning.
Setting a password for V-Chip functionality.
Selecting picture modes like Standard, Sports, Movie.
Steps for playing discs and basic operations.
Pausing playback and resuming.
Advancing playback one frame at a time.
Slow motion playback capabilities.
Magnifying parts of the picture for detail.
Finding specific titles, chapters, or times.
Resuming playback from marked scenes.
Repeating playback of a chapter, title, or track.
Arranging playback order of tracks or files.
Selecting different camera angles for playback.
Choosing between multiple titles on a disc.
Selecting preferred audio language.
Displaying playback information like time and language.
Automated playback of JPEG files.
Changing default settings for performance.
Selecting language for menu, subtitle, and audio.
Choosing screen aspect ratios (4:3, Letterbox, Pan&Scan).
Setting interval for JPEG slideshow playback.
Modifying the parental control level.
Reference for language codes used in settings.
