21
Basic setup
Setting the language /
Clock setting
MENU
C/D/B/A
RETURN
Clock setting
You must set the date and time manually for ON/OFF timer.
Press MENU in the TV mode, then press
or
to select SETUP menu.
EXAMPLE: Setting the clock to “8:30 AM”, 25th. (SAT)
March, 2006.
1
Press or to select “CLOCK SET”, then
press
. The CLOCK SET menu will appear.
2
Press or to set the month, then press .
3
Notes:
•
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
• When you set the minute, you can change in 10-minutes step
by holding down or .
After setting the clock, date and time starts
functioning automatically.
5
Set the day, year and time as in step 3, then
press ENTER.
4
To make corrections anytime during the process
Press or repeatedly until the item you want, then
set the item again.
Press or to select the desired language:
English (ENGLISH), French (FRANÇAIS) or
Spanish (ESPAÑOL).
3
Press MENU in the TV mode, then press or
to select SETUP menu.
1
Press RETURN to clear the menu screen.
4
Setting the language
This unit can display the on screen language in English,
Spanish or French.
Press or to select “LANGUAGE”.
2
:SELECT :ADJUST
ENGLISH
CABLE
RETURN:ENDRETURN:END
ENTER
5V80101A [E]p20-21 2/22/06, 1:14 PM21
To Next Page
Loading...
