Toshiba MD26H82 - To Memorize Channels

25
TV operation
Press MENU in the TV mode, then press or
to select SETUP menu.
Press or to select “TV/CABLE”.
1
2
Press or to select “TV” or “CABLE”.
3
TV - VHF/UHF channels
CABLE - Cable TV channels
TV/CABLE selection
To memorize channels
This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit’s memory. To use this unit with an
antenna, set the TV/CABLE selection to the TV position. When
shipped from the factory, this selection is in the CABLE position.
To ADD/ERASE channels
Press MENU in the TV mode, then press or to
select SETUP
menu. Press or to select the
“CH PROGRAM”, then press
.
The TV will begin memorizing all the
channels available in your area.
Automatic memory tuning
Press or to select the channel you want
and then press
or to select “ADD” or
“ERASE”.
3
MENU
/ / /
Press MENU in the TV mode, then press or
to select SETUP menu.
Press
or to select “ADD/ERASE”.
Repeat steps 3 for other channel you want to
add or erase.
4
RETURN
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
ENGLISH
CABLE
:SELECT :ADJUST
RETURN:ENDRETURN:END
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
ENGLISH
TV / CABLE
:SELECT :ADJUST
RETURN:ENDRETURN:END
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
ENGLISH
TV / CABLE
:SELECT :ADJUST
RETURN:ENDRETURN:END
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
ENGLISH
TV
:SELECT :ADJUST
RETURN:ENDRETURN:END
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
ENGLISH
CABLE
:SELECT :ADJUST
RETURN:ENDRETURN:END
1
Press RETURN to clear the menu screen.
4
Press .
The ADD/ERASE menu will appear.
Press
to select “ADD/ERASE”.
2
1
2
3
4
5
5-001
5-002
ADD/ERASE
ADD /ERASE
CH SIGNAL
ANALOG ERASE
ANALOG ADD
ANALOG ERASE
ANALOG ERASE
ANALOG ADD
DIGITAL ADD
DIGITAL ADD
CLEAR ALL
SETUP MENU
:SELECT :ADJUST
ADD/ERASE
ADD/ERASE
CH SIGNAL
ANALOG ADD/ERASE
ANALOG ADD
ANALOG ERASE
ANALOG ERASE
ANALOG ADD
DIGITAL ADD
DIGITAL ADD
CLEAR ALL
SETUP MENU
:SELECT :ADJUST
1
2
3
4
5
5-001
5-002
Press RETURN to clear the menu screen.
5
5V80101A [E]p22-29 2/22/06, 1:14 PM25