35
TV operation
After your desired setting, press RETURN to
clear the menu screen.
Press or to select the item you want to
adjust, then press
or to adjust the setting.
1
2
Press MENU in the TV mode, then press or
to select PICTURE menu.
After your desired setting, press RETURN to
clear the menu screen.
3
Note:
The CONTRAST default setting is set to maximum
(+50) at the factory.
Picture control adjustment/
Adjusting the picture preference
Picture controls are factory preset but you can adjust them individually as
follows:
And also you can select four picture modes—Standard, Sports, Movie, and
Memory—as described in the following table:
Picture control adjustment Adjusting the picture preference
Press or to select “MODE”, then press
or to select the desired picture mode.
1
2
Press MENU in the TV mode, then press or
to select PICTURE menu.
Mode Picture quality
SPORTS Bright and dynamic picture (factory-set)
STANDARD Standard picture quality (factory-set)
MOVIE Movie-like picture setting (factory-set)
MEMORY Your personal preferences (set by you;
see “Picture control adjustment” on left)
/ / /
MENU
Selection Pressing
BRIGHTNESS darker lighter
CONTRAST lower higher
COLOR paler deeper
TINT reddish greenish
SHARPNESS softer sharper
RETURN
3
To Next Page
Loading...
