Toshiba MD26H82 - Selecting the Display Format; Selecting the Scan Velocity Modulation (SVM)

37
TV operation
Selecting the display format/
Selecting the Scan Velocity Modulation (SVM)
Display format feature converts a 480p input signal to 540p or 1080i.
The SVM feature enhances picture contrast and sharpness. This
feature has three modes: HIGH, LOW and OFF.
Selecting the display format
Press MENU in the TV mode, then press or
to select PICTURE menu.
1
Press or to select “540p” or “1080i”.
3
Notes:
• The DISPLAY FORMAT feature is available only for 480p
input. 1080i is always output when a signal other than 480p
is input.
• If you notice flickering in a 480p image, try setting the
DISPLAY FORMAT to 540p.
Press RETURN to clear the menu screen.
4
Press MENU in the TV mode, then press or
to select PICTURE menu.
1
2
Press or to select “SVM”.
Selecting the Scan Velocity Modulation (SVM)
3
Press or to select the mode you prefer.
Note:
SVM is not required when viewing some high-quality video
material. If you are watching high-quality video material, you
may want to set SVM to OFF.
MENU
/ / /
RETURN
Press or to select “DISPLAY FORMAT”.
2
Press RETURN to clear the menu screen.
4













 














 

PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
OFF
COOL
540p / 1080i
HIGH
:SELECT :ADJUST
RETURN:END
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
OFF
COOL
540p / 1080i
HIGH
:SELECT :ADJUST
RETURN:END
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
OFF
COOL
1080i
HIGH / LOW / OFF
:SELECT :ADJUST
RETURN:END
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
OFF
COOL
1080i
HIGH / LOW / OFF
:SELECT :ADJUST
RETURN:END
5V80101A [E]p35-37 2/22/06, 1:16 PM37