EN-16
OPERATION
1. CLOCK SETTING
When the microwave oven is plugged into a outlet, "0:00" will display.
(1) Press Clock, "00:00" and "Clock" will appear in the display. The first figure will flash;
":" and other "0" will be lighted.
(2) Press the number pads and enter the current clock time. For example, if the time
is now 10:12, press " 1, 0, 1, 2" in order.
(3) Press Clock to finish clock setting, ":" will flash and the numbers will appear as a
clock time in the display.
NOTE
the setting will not be accepted until valid numbers are entered.
(2)In the process of setting clock, if the pad is pressed or if there is
no operation within 1 minute, the display will automatically return to the
previous clock setting.
2. KITCHEN TIMER
(1) Press Kitchen Timer , "00:00" and "Timer" will appear in the display.
(2) Press the number pads to enter the time amount. The maximum amount of
time that can be entered is 99 minutes, 99 seconds.
(3) Press to confirm setting, the timer indicator will flash, and the timer will
count down.
(4) When the time amount elapses, the oven will beep 5 times. "End" will display.
The time of day will display by opening the door or pressing pad.
NOTE
(1)The Kitchen Timer setting is different from the Clock setting; it is
simply a timer.
(2)During the Kitchen Timer function, no cooking function can be set
into operation.
(3)Kitchen Timer amount cannot be increased by pressing .
(4)Pressing will cancel the Timer countdown.
(1)If the numbers entered are not within the range between 1:00 to 12:59,
INSTRUCTION FOR USE
To Next Page
Loading...
Need help?
General
