16. COOKING END REMINDER FUNCTION
The oven will beep five times to alert the user that cooking time has ended. "End" will
display. The time of day will display by opening the door or pressing pad.
17.OTHER SPECIFICATIONS
(1) must be pressed to continue cooking if the oven door is opened during
cooking.
(2) A single beep sounds to indicate that a pad is correctly pressed; if pad is not
correctly pressed, no beep sounds.
18. SCREEN-OUT FUNCTION
(1) In standby, click the key twice into the black screen save electricity mode.
(2) Press any button to turn off the screen, resume the standby display, and beep
once.
19. MUTE FUNCTION
Mute Function (memory after power-off):press the number key “8” for a long time,
to switch the silent mode after 3 seconds, and “beep”once .
LED display on/off ,All beeps in the mute mode do not respond.
20. TURNTABLE RESET FUNCTION
When cooking finished, if the turntable is not at the initial position, it will enter
the turntable reset function. At this time, the lamp, fan and turntable are working,
" " will dynamic display. After the turntable has reset, the oven stops cooking
and reminds cooking is finished.
(1) This function only works for one completed cooking. If pause or open the
oven door during cooking, the current cooking cannot enter the turntable
reset function.
(2) In waitting state, press number key "5" for 3 seconds, there will be a long
"beep" and the turntable reset function is turnned off. To turn on the turn-table
reset function, in waiting state press number key "5" for 3 seconds, there will be
a long "beep" denoting that turntable reset function is released.
OPERATION
EN-24
NOTE
1) Under the reset state, opening the door or button is pressed,
the oven will go back to waiting state.
2) The function will be reserved after power loss
INSTRUCTION FOR USE
To Next Page
Loading...
Need help?
General
