ADOPTION OF NEW REFRIGERANT
This Air Conditioner is a new type which adopts a new refrigerant HFC (R410A) instead of the conventional
refrigerant R22 in order to prevent destruction of the ozone layer.
Thank you very much for purchasing TOSHIBA Air Conditioner.
Please read this owner's manual carefully before using your Air Conditioner.
• Be sure to obtain the “Owner’s manual” and “Installation manual” from constructor (or dealer).
Request to constructor or dealer
Please clearly explain the contents of the Owner’s manual and hand over it.
ADOPTION OF NEW REFRIGERANT
This SUPER HRM Air Conditioner is a new type which adopts a new refrigerant HFC (R410A) instead of the
conventional refrigerant R22 in order to prevent destruction of the ozone layer.
Be sure to use an indoor or outdoor unit in combination with the new refrigerant.
Thank you very much for purchasing TOSHIBA SUPER HRM Air conditioner.
Please read this manual carefully before using your Flow Selector unit.
• When installing an indoor or outdoor unit, follow the installation manual supplied with the unit.
• To connect the Flow Selector unit to an outdoor unit with pipes, a branching joint or header is required.
Choose one according to the capacity of the units.
• Nitrogen gas is filled in the selection unit. Be careful when removing flare nuts.
ADOPTION OF NEW REFRIGERANT
This Air Conditioner is a new type which adopts a new refrigerant HFC (R410A) instead of the conventional
refrigerant R22 in order to prevent destruction of the ozone layer.
Thank you very much for purchasing TOSHIBA Air Conditioner.
• This manual describes the installation method at the outdoor unit side.
• Before installation, please read this Manual thoroughly to perform correct installation.
• For pipe connection for the indoor and outdoor units, flow selector unit Y-shape branching joint or branch
header required sold separately. Select it according to the capacity.
• For pipe connection between the outdoor units, T-shape branching joint which is sold separately is required.
ADOPTION OF NEW REFRIGERANT
This Air Conditioner is a new type which adopts a new refrigerant HFC (R410A) instead of the conventional
refrigerant R22 in order to prevent destruction of the ozone layer.
Thank you very much for purchasing TOSHIBA Air Conditioner.
• This manual describes the installation method at the outdoor unit side.
• Before installation, please read this Manual thoroughly to perform correct installation.
• For pipe connection for the indoor and outdoor units, flow selector unit Y-shape branching joint or branch
header required sold separately. Select it according to the capacity.
• For pipe connection between the outdoor units, T-shape branching joint which is sold separately is required.
To Next Page
Loading...
Need help?
General
