Why is my Toshiba MMD-UP0961HFP-E Air Conditioner only performing fan operation?
If your Toshiba Air Conditioner is only running the fan, it might be because the outdoor or suction air temperature is outside the operating range for cooling and heating. In this case, the system automatically switches to fan mode.
What does it mean when my Toshiba MMD-UP0961HFP-E Air Conditioner is not a failure?
This is normal in the Toshiba Air Conditioner: * White misty cold air or water is coming out. * Sometimes, a noise of air leak is heard. * A “Swish” sound is sometimes heard. * A slight clacking sound is sometimes heard. * A specific indication is lit. * Sound or cool air is output from the stand by indoor unit. * When power of the air conditioner is turned on, “Ticktock” sound is heard. * LCD blurs when it is touched.
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.2 |
| Indoor Unit Weight | 9 kg |
| Cooling Capacity (BTU) | 9, 000 BTU |
Defines roles and qualifications for installing and servicing air conditioners.
Outlines necessary protective equipment for various work tasks.
Covers essential safety points for daily operation and general use.
Provides safety instructions for moving and storing the air conditioner.
Details critical safety measures during the installation process.
Covers safe practices during the operation of the air conditioner.
Outlines critical safety steps when the unit requires repair.
Safety instructions and precautions for relocating the air conditioner.
Important cautions related to the installation of the air conditioner.
Important cautions related to the operation of the air conditioner.
Identifies key components of the fresh air intake indoor unit.
Explains the various icons and indicators shown on the remote controller display.
Details the initial standby state and how to start running the unit.
Guides on selecting fan speed, operation mode, and temperature settings.
Instructions on how to set and cancel the indoor unit's OFF timer.
Guidance on choosing an appropriate location for installing the unit.
Advice on managing operational sounds and vibrations from the unit.
Essential checks, defrosting, and protection mechanisms before operation.
Information on cooling/heating operations, power failures, and heating characteristics.
Instructions for cleaning long-life and replacing high-efficiency air filters.
Lists common issues and their potential causes for the air conditioner.
Explains how to check and confirm past troubleshooting history records.
Provides technical specifications including sound pressure and weight for various models.
Declares compliance with relevant European directives and standards.
To Next Page
