R
richardgregoryAug 12, 2025
How to clean a contaminated filter in a Toshiba Air Conditioner?
- DDebbie BlanchardAug 12, 2025
If the filter of your Toshiba Air Conditioner is contaminated, wash it with water to remove the contamination.
To Next PageTo Next PageHow to clean a contaminated filter in a Toshiba Air Conditioner?
If the filter of your Toshiba Air Conditioner is contaminated, wash it with water to remove the contamination.
What to do if the filter of my Toshiba MMU-AP0272H is damaged?
If the filter of your Toshiba Air Conditioner is damaged, replace it with a new one.
What to do if there is dust/dirt clogging in the drain pan of my Toshiba Air Conditioner?
If the drain pan of your Toshiba Air Conditioner is clogged with dust or dirt, clean the drain pan. Also, make sure to check the downward slope to ensure smooth drainage.
How to clean dust/dirt clogging in the heat exchanger of Toshiba MMU-AP0272H Air Conditioner?
If the heat exchanger in your Toshiba Air Conditioner is clogged with dust or dirt, wash it to remove the blockage.
How to clean a contaminated fan in a Toshiba MMU-AP0272H?
If the fan of your Toshiba Air Conditioner is contaminated, brush or wash it to remove the contamination.
What to do if ornamental panel or louvers of Toshiba MMU-AP0272H are contaminated?
If the ornamental panel or louvers of your Toshiba Air Conditioner are contaminated, wash them. Alternatively, you can apply a repair coating.
What to do if air inlet/outlet grilles of my Toshiba Air Conditioner are deformed or damaged?
If the air inlet or outlet grilles of your Toshiba Air Conditioner are deformed or damaged, fix or replace them.
What to do if Toshiba MMU-AP0272H Air Conditioner fan has vibration or balance issues?
If the fan of your Toshiba Air Conditioner has terrible vibration or balance issues, replace it.
General| Category | Air Conditioner |
|---|---|
| Cooling Capacity (kW) | 2.7 |
| Heating Capacity (kW) | 3.2 |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Dimensions (W x H x D) | 780 x 550 x 290 mm |
Covers essential safety measures including earth wire checks, modification prohibition, using specified parts, and handling refrigerant.
Details safety checks for assembly, cabling, insulation, ventilation, and post-repair verification.
Highlights R410A pressure, risks of mixing, and safe handling of pipes and tools.
Lists essential tools for R410A and general tools applicable for conventional refrigerants.
Step-by-step instructions for recharging refrigerant, including warnings against overcharging.
Emphasizes using vacuum pump methods for air purge and avoiding refrigerant gas discharge.
Details specifications for indoor units including capacities, dimensions, electrical data, and components.
Provides external views, dimensions, and connection port details for specific models.
Provides external views, dimensions, and connection port details for specific models.
Provides external views, dimensions, and connection port details for specific models.
Provides external views, dimensions, and connection port details for specific models.
Detailed wiring diagram for the 4-Way Air Discharge Cassette indoor unit.
Details part ratings for various models and explains key components of the indoor unit.
Identifies the display section indicators and operation section buttons on the remote controller.
Explains various indicators displayed on the remote controller screen (e.g., air volume, mode).
Details the function of each button on the remote controller's operation section.
Guides on preparing the unit and performing basic start/stop and mode selection.
Details operation specifics for cooling, heating, and automatic modes, including notes.
Covers general cautions, model-specific adjustments, and cooling/heating direction settings.
Details on setting wind direction, starting/stopping swing, and unit selection for cassette types.
Procedures for individual louver control and setup for various cassette types.
Explains setting different timer types (OFF, Repeat OFF, ON) and provides relevant notes.
Covers selection of installation place, electrical wiring safety, and location restrictions.
Details daily maintenance, filter cleaning, unit care, and periodic checks.
Provides maintenance notes, re-installation warnings, and heat exchanger cleaning cautions.
Covers pre-operation checks, capacity factors, protective devices, and operating conditions.
Lists common symptoms, their causes, and critical cautions for immediate dealer contact.
Explains how to confirm check codes, error history, and required professional checks.
Lists accessory parts and provides general safety precautions for installation.
Covers R410A installation safety and procedures for disconnecting main power.
Provides warnings and criteria for selecting suitable installation locations.
Specifies installation space, ceiling height limits, and discharge direction options.
Covers installation requirements and procedures for hanging bolt installation.
Details procedures for ceiling opening, panel, and remote controller installation.
Covers drain piping work, materials, insulation, and draining checks.
Details heat insulation, refrigerant piping, and important piping work precautions.
Covers tightening connections, airtight tests, thermal insulation, and electrical safety warnings.
Details wiring specifications, communication lines, and connection requirements.
Shows wiring diagrams for remotes, flow selector, address setup, and ceiling panel.
Guides on setting functions, filters, high ceiling, and other controls using a wired remote.
Covers wireless remote usage, restoring factory settings, filter sign time, and swing/direction settings.
Explains louver lock, remote sensor settings, group control, and swing modes.
Detailed steps for performing test runs using both wired and wireless remote controllers.
Covers safety, daily maintenance, air filter cleaning, unit care, and discharge louver cleaning.
Provides a maintenance list and introduces troubleshooting steps, including error confirmation.
Lists check codes for indoor units, their meanings, and associated parts to check.
Lists error codes detected by remote controllers and central control systems.
Provides a list of check codes for outdoor units and their corresponding errors.
Details specific outdoor unit error codes, their detection conditions, and check items.
Lists representative error codes detected by the IPDU in outdoor units.
Details error codes detected by TCC-LINK central control devices.
Graphs showing resistance vs. temperature for TA, TC1, TC2, and TCJ indoor sensors.
Step-by-step guide for detaching and attaching the suction grille and electric parts cover.
Procedures for handling the electric parts cover and adjust corner cap.
Detailed steps for removing and installing the ceiling panel.
Instructions for detaching and attaching the control P.C. board, including cautions.
Step-by-step guide for removing and installing the drain cap.
Detailed steps for removing and attaching the fan motor, including torque specifications.
Continuation of fan motor attachment and crucial cautions for motor replacement.
Step-by-step instructions for removing and installing the drain pump.
Procedures for detaching and attaching the float switch assembly and drain pan.
Instructions for removing and installing the PMV motor, including torque control.
Detailed steps for removing and installing the heat exchanger.
Procedures for P.C. board exchange, including cautions and notes on EEPROM data.
Steps for reading EEPROM data and replacing the P.C. board, covering different cases.
Guides on wiring setting data to EEPROM and specific settings for 4-way cassette models.
Steps for verifying setting data, changing CODE No., and completing the setup.
Tables providing reference for item codes (DN) and related settings.
Exploded views and parts lists for specific MMU-AP models.
Exploded views and parts lists for specific MMU-AP models.
Exploded views and parts lists for RBC-U31 series remote controllers.
Exploded views and parts lists for RBC-AX31U series remote controllers.
