– 12 –
2. SPECIFICATIONS
Model
Heating capacity *1
Electrical characteristics
Appearance
Dimension
Weight
Design Pressure
Heat exchanger
Heat-insulating material
Water flow rate
Water pressure loss (at standard water flow rate)
Controller
Operation range
Water filter
Connecting pipe
Sound pressure level
Installation place
16.0
1 phase 50Hz 220 – 240V
14 14
Zinc hot dipping steel plate
580
400 (467)
250
357
638
833
20.3
25
4.15
1.0
Plate type heat exchanger
Polyethylene foam + Polyurethane foam
45.8
38.9
44.2
Remote controller
5 – 32
23 or less
30-85
-20 – 21
-20 – 19
-25 – 21
-25 – 19
-25 – 40
-25 – 28
-25 – 21
-25 – 19
-20 – 21
-20 – 15
15 – 45
25 – 50
Strainer with Mesh 30 to 40 (procured locally)
R1 – 1/4
R1 – 1/4
Height
Width (leg include)
Depth
Height
Width*3
Depth
Indoor
Inlet
Outlet
R1
Power supply *2
Running current
Power consumption
Unit
Packed
Unit
Packed
Refrigerant side
Water side
Standard
Min.
Ambient
Water inlet side
Water outlet side
Water pipe
Refrigerate pipe
Drain pipe
(kW)
(A)
(W)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(kg)
(kg)
(MPa)
(MPa)
(L/min)
(L/min)
(kPa)
(˚CDB)
(˚CDB)
RH(%)
(˚CDB)
(˚CWB)
(˚CDB)
(˚CWB)
(˚CDB)
(˚CWB)
(˚CDB)
(˚CWB)
(˚CDB)
(˚CWB)
Allowable dew point
Outdoor (at heating)
SMMS-i
Outdoor (at heating)
SMMS-e
Outdoor (at heating)
SHRM-e
Outdoor (at heating)
SMMS-u
Outdoor (at heating)
MiNi SMMS-e
(˚C)
(˚C)
(dB(A))
Indoor
MMW-UP0561LQ-E/TRMMW-UP0271LQ-E/TR
8.0
0.08 0.08
17.8
23
22.9
19.5
40.5
25
Gas pipe
Liquid pipe
(mm)
(mm)
Dia. 15.9 flare connection
Dia. 9.5 flare connection
27
*1 Rated conditions : Inlet water temp. 30°C outlet water temp. 35°C Outdoor air temp. 7°CDB / 6°CWB.
The standard piping means that main pipe length is 5m, branching pipe length is 2.5m of branch piping
connected with a 0 meter height.
*2 The source voltage must not fluctuate more than ±10%.
*3 The unit is packed in a sideways state.
*4 This specification is value as of December, 2020, please note that specification is subject to change
without notice.