EasyManua.ls Logo

Toshiba MMY-MAP0726HT6P-UL - Page 17

Toshiba MMY-MAP0726HT6P-UL
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 16 –
31-EN 32-EN
EN
EN
ES
EN
Cleaning of air discharge louver
The air discharge louver can be removed to clean
if necessary.
1 Remove the air discharge louver.
Holding both ends of the air discharge louver,
remove it by sagging the center downwards.
2 Clean the air discharge louver with water.
If dirt is heavy, clean the air discharge louver
using tepid water with neutral detergent or just
water.
3 Mount the air discharge louver.
First push in the one side, and insert the opposite
side by sagging the center downwards.
(2) Insert in the louver
sagging down the
center downward.
(1) Insert
NOTE
Insert the louver in the correct direction.
Insert the louver with the printed mark facing
upwards, and the arrow on the louver pointing in the
outward direction.
Medium static ducted type
Air filter replacement
If is displayed on the remote control, replace the air
filter.
1 Push the button to stop the
operation, then turn off the circuit breaker.
F
4
1, 3
2 Replace the new air lter. (locally procured)
1) Remove the cover plate.
Remove the cover plate with 2 screws.
Cover plate fixing
screws
Cover plate
2) Pull out the lter rack, and set the air lter
(locally procured) in it.
Filter rack
Air filter
(locally procured)
3) Push the lter rack in fully and reattach the
cover plate. (Screws x 2)
Air filter
(locally procured)
3 Turn on the circuit breaker, then push the
button on the remote control to start
the operation.
4 After cleaning, push .
display disappears.
CAUTION
Do not start the air conditioner while leaving air
lter removed.
Push the lter reset button. ( indication will be
turn off.)
Floor Console Exposed Type
1 Push down the upper part of the return air
grille slightly, and then pull it toward you to
remove it.
2 Take out the air lter inside the return air
grille.
3 Vacuum dust or brush clean.
If heavily stained, it is more effective to wash in
lukewarm water mixed with neutral detergent.
After washing, rinse it well, and dry it in the
shade.
Reinstall the cleaned air lter.
Floor Console Recessed Type
1 Push down hook of the air lter on the front
panel (Lower side).
2 Pull the air lter toward you to remove it.
Front panel
(Lower)
Air filter knob
3 Vacuum dust or brush clean.
If heavily stained, it is more effective to wash in
lukewarm water mixed with neutral detergent.
After washing, rinse it well, and dry it in the
shade.
Reinstall the cleaned air lter.
1117907101 EN FR.indb 161117907101 EN FR.indb 16 3/21/16 11:44 AM3/21/16 11:44 AM

Related product manuals