EasyManua.ls Logo

Toshiba MMY-MAP0804HT8(Z)(ZG)-E - Page 273

Toshiba MMY-MAP0804HT8(Z)(ZG)-E
370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
272
8 Pipe fixing rubber
- detachment/
attachment
MAP0804#
MAP1004#
MAP1204#
This product employs pipe fixing rubber (eyeglass type), combined with a SUS band, to restrain pipes
subject to vibration to improve reliability.
<Use of SUS band - total 5 locations>
MAP1404#
MAP1604#
This product employs pipe fixing rubber (eyeglass type), combined with a SUS band, to restrain pipes
subject to vibration to improve reliability.
<Use of SUS band - total 10 locations>
No. Part to be replaced Work procedure Remarks
SV41 valve <=> Suction pipe
Ø8.0 <=> Ø19.05
SV42 valve <=> Suction pipe
Ø8.0 <=> Ø19.05
SV2 valve <=> Discharge pipe
Ø6.35 <=> Ø15.88
Oil header <=> Liquid pipe
Ø25.4 <=> Ø12.7
Suction pipe <=> Distributor
Ø19.05 <=> Ø22.22
SV41 valve <=> Suction pipe
Ø8.0 <=> Ø19.1
SV42 valve <=> Suction pipe
Ø8.0 <=> Ø19.1
SV43 valve <=> Suction pipe
Ø8.0 <=> Ø19.1
SV2 valve <=> Discharge pipe
Ø6.35 <=> Ø19.1
Liquid pipe <=> Balance pipe
Ø15.9 <=> Ø9.52
(Upper side rubber damper)
Oil header <=> Liquid pipe
Ø25.4 <=> Ø12.7
SV3C valve <=> Discharge pipe
Ø6.35 <=> Ø15.9
Suction pipe <=> Distributor
Ø19.1 <=> Ø9.52
Suction pipe <=> Discharge pipe
Ø28.6 <=> Ø12.7
Suction pipe <=> SV3F valve
Ø19.1 <=> Ø9.52

Table of Contents

Related product manuals