to an audio system
Connect the unit to your audio system.
For details of output sound, see [_.
_ Signal flow
To ANALOG AUDIO OUT
To audio inputs of
theamplifier gte)'_(red)
Audio system
• Make the following setting.
On-screen display Select: Page
"Audio Out Select" "Analog 2ch" [_
Notes:
• Refer to the owner's manual of the connected equipment as well.
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away
from the tuner and radio.
• The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level.
Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the unit's power cord. If you leave the amplifier power on, the
speakers may be damaged.
116
To Next Page
Loading...
