nnecting to optional equipment
You can enjoy high quality dynamic sounds of DVD video discs or audio CDs by
connecting the unit to optional audio equipment.
For details of output sound, see [_. I! : Fr°nt speaker::SubRearwooferspeaker
r_ : Center speaker
: Signal flow
! €onnecting to an amplifier equipped with a Dolby Digital decoder .....
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies,
and is now available to reproduce this realistic effect in the home. You can enjoy motion
picture and live concert DVD video discs with this dynamic realistic sound by connecting the
unit to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital
processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of
Pro Logic from the same DVD movies that provide full 5.1
-channel Dolby Digital soundtracks, as well as from titles with
the Dolby Surround mark.
Amplifier equipped with a]
Dolby Digital decoder |
ToCOAXIAL ._
type digital l
audio input
75 _ coaxial cable
Manufactured under license from Dolby
Laboratories. "Dolby" "Pro Logic" and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
unpublished works. ©1992-t997 Dolby
Laboratories. All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display Select: Page
"Audio Out Select" "Bitstream"
Recording system 13[1 D [_
o_-.
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
• With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an amplifier
equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set
the amplifier so you can enjoy Dolby Pro Logic Surround sound.
• With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
-]
)lifter equipped with /
Dolby Pro Logic Surround
/
audo::ca
,oANA'O
AUDIO OUT
• Make the following setting.
On-screen display Select:
"Audio Out Select" "Analog 2ch"
Page
Be sure to set "Audio Out Select"
to "Analog 2ch" when you enjoy
sounds of Dolby Pro Logic
Surround using this connection.
* Connect one or two rear speakers.
The output sound from the rear speakers will be
monaural even if you connect two rear speakers.
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use,
on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS
encoded sound tracks on DVD video discs or audio CDs.
I To COAXIAL I_._
I_ type digital "_
audio input l
E_ 75 _ coaxial cable
"DTS" and "DTS Digital Surround" are
trademarks of Digital Theater Systems,
Inc.
• Use DVD video discs or audio
CDs encoded via the DTS
recording system.
Make the following setting.
On-screen display Select:
"Audio Out Select .... Bitstream"
Recording system DTS
Page
171
To Next Page
Loading...
