setting
The Auto Clock function will automatically set the built-in clock (Month,
Day, Year and Time) when the unit is connected to an Antenna or Cable
system and it is turned off. As the unit searches for a receivable station
in your area and it receives a broadcast signal for Auto Clock, the Auto
Clock needs several minutes to set itself.
_.........................'4 TVNCR
:_ _ POWER
! _ t DISPLAY
i ..... I
I
2,3
: 1, 5
' 2,4
[ Auto clock setting ................................. auto clock to off .....................................j
Preparation:
• Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
• Plug the AC Power cord to the AC outlet.
When shipped from factory the AUTO CLOCK is set to "ON".
Make sure the unit is turned off.
2
But if you do not want auto clock set (Adjustment):
Press MENU.
I -I _R RECSET /
I I CH SET-UP ]
I AUTO_W=AT _ _F
SETUP k _A_iENTE_,_ j• If you press POWER, the Auto Clock
POWER
O set is not effective.
Wait at least three minutes and press POWER.
The POWER indicator will light.
POWER POWER
_. //
I i\
Press DISPLAY to check the clock on the
screen.
• DISPLAY
0
TVNCR
8 :47_ MON CH 125
STEREO SAP
:O0 CO 8P
If the clock is not set, check the antenna
condition. The auto clock may not function
properly if the reception condition is not
good.
Press t or _ to select "SYSTEM SET-UP",
then press ENTER.
The auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
• If you use a cable box and you want auto clock
adjustment to be performed, the cable box must be left
on.
• The auto clock adjustment is not effective when there is
a difference of more than 5 minutes exists between the
built-in clock time and the actual time.
r MENU
I TIMER REC _:'t" l
| TVSET.UP /
I OHSET.UP /
_ro.EP_ O.,OFFg
;,,sY_Ms_P /
(M_rtENTER/MENU) J
Press | or | to select "AUTO CLOCK".
4
•ili_il
Press ENTER to select "OFF".
Press MENU repeatedly until the MENU
screen is cleared.
MENU • When the AUTO CLOCK is set to
O "OFF", the Auto Clock adjustment
SETUP does not function.
• Set the clock manually _.
[2O
To Next Page
Loading...
