connections
ff you are using an indoor or outdoor antenna, follow the instructions be)ow that correspond to your antenna system.
(f you are using a cable TV service (CATV), see gage 15 for Cabte TV conneotions.
75 ohm
Coaxial
Cabte
Antenna Antenna
Jack Jack
300-75 ohm
Matching
Transformer
Connect the 75 ohm Cable from the Combination VFtF/UHF
Antenna to the Antenna Jack.
If your Combination VHF/UHF Antenna has a 300 ohm
Twin-lead Wire, the use of the 300-75 ohm Matching
Transformer may be necessary.
Antenna 300-75 ohm
ck Matching
Transformer
C°mbiner/__
UHF 300 ohm _--_'_. " )
i
VHF 300 ohm
Connect the UHF 300 ohm Twin-lead Wire to the
Comb_ne_ {_',otsupplied). Connect the VHF 300 ohm
Twin-lead Wire to the 300-75 ohm Matching Trans-
former. Attach the Transformer to the Combiner, then
attach the Combine_ to the Antenna Jack,
Antenna
Jack
Connect the VHF 75 ohm cable and UMF 300 ohm Twin-
lead Wire to the Combiner (not supplied), Attach the
Combiner to the Antenna Jack.
14
To Next Page
Loading...
