.... nnecting to optional equipment
Before connecting the unit to ether equipment, be sure to lurn oll the power and unp}ag all of the equipment from the
wall outlet before making any connections.
You can enioy the 7"7game, cemcorder or high quality dynamic sounds of DVD video discs or audio CDs by connecting
lhe unit Io optional audio equipment.
Select "LINE 2" using the INPUT SELECT button.
Signal flow
Illustration of MW2OFN1/R
(white)_ t ToAUDIO (L/R)/VIDEOIN(LINEIN 2)
(red) f U_
Connect the unit to your audio system.
To AUDIO (L/R)/VIDEO OUT
Audio/Video cable (not supplied)
J •
(yellow)/ _"
(while)/z,/
(red) "_/
Camcorder
OR
TV GAME I
To ANALOG AUDIO OUT
(white) Audio cable (not supplied)
• Refer to the owner's maneal of the connected equipment as well.
Audio system
(white)
(red)
To audio inputs of the amplifier
• It you place the unit near a tuner or radio, the radio broadcast sound might be distorted, In this case, place the unit away
from the tuner and radio,
• The output sound of the unit has a wide dynami0 range, Be sure to adjust the receiver's volume to a moderate listening level.
Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you caanect or disconnect the unit's power card. If you leave the amplifier power on>the
speakers may be damaged.
16
To Next Page
Loading...
