Operation (continued)
i
--CHANNELA/v
MUTE
CHANNELRETURN
SLEEP
To set the unit to turn off after a preset amount of time,
press SLEEP on the remote control
The clock will count down 10 minutes far each press of
SLEEP (120, 110, ...10, 0). After the sleep time is
programmed, the display wil_ appear bhafly eve_ ten
minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting, press SLEEP and the
remaining time will be display for a few seconds. To
cancel the sleep timer, press SLEEP repeatedly until the
display turns 1o 0.
.SLEEP
Q
Press MUTE to switch off the sound. The unit's sound will
be silenced and "MUTE" wil_ briefly appear on the screen.
The sound can be switched back on by pressing this
button again or one of VOLUME • or Y.
-MUTE
Q
Note:
To I{ster_ through the haadphor_a, insert a headphone (not
supplied)witha I18"miniplug intoHEADPHONE jackon the
_ont. The sound from the TV speaker is muted.
Press and release CHANNEL A or V.
The che,nr_I automatically stops et the nextchannel set
into memory. For proper operation, before selecting
channels, they should be set into the memar_ See page
26 "S_tting channels autamatieaUy".
Q
CHANNEL
Q
This button allows you to go back to the last channel
setectad by pressing CHANNEL RETURN, Press this but-
ton again to return to the last channet you were watching.
CHANNEL
RETURN
0
SKIP
24
To Next Page
Loading...
