The fo{law{ngpages describethe setuplcperationinDVD mede.
il
il
_ ,:_ 2 i_
Insert the AC cord plug into a standard 120V
60Hz polarized AC outlet.
_fthe AC cord plug is plugged in for
the first time, weltfor about 5
seconds before pressing POWER.
Press POWER on the unit or on the remote
control to turn on the unit.
POWER
• The POWER indicator will light.
• Every time you press POWER, the
unit starts from TV mode.
• When using an amplifier, switch on
the amplifier.
3 Press DVD to select DVD mode.
DVD The DVD sfartup screen will appear
on the screen,
i
0;I
_=.
€}
Notes:
• Whenconnect_ngtootherequipment, unplugtheunitfromthe
AC cutlet.
• If the unit does not operate properly: Static electricity, etc,,
may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
491
To Next Page
Loading...
