Chapter 1 Introducing the JTNI
6F8C1621
Station address setting switch (STN-H, STN-L)
Switches to set the station address in hexadecimal. For setting method,
refer to "Chapter 3 Setting."
Operation mode setting switch (MODE)
Switches to set the operation mode. For setting method, refer to "Chapter 3
Setting."
TC-net 100MT-RJ connectors (TN-A and TN-B)
A communication port for the TC-net 100. The optical fiber cord with the
MT-RJ connector is connected to it.
Ethernet connectors (EN)
Not connect cable to EN, for reserved. (As for message support for future.)
To Next Page
Loading...
