Toshiba nv-pack Series - JTNI 1.2.2 Functions of the Parts; Functions of the Parts

1.2 Names and Functions of the Parts
Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
5
1.2.2 Functions of the parts
The major functions of the parts are as shown below.
State display LED
Table 1-1 Display details on the state display LED and normal display
Name Display
Normal
display
TN-A
LINK
(green)
Displays the TC-net 100 A system link state.
ON: Connected to the hub successfully.
OFF: Not connected to the hub.
ON
TN-A
ACT
(green)
Displays the TC-net 100 A system frame transmission state.
Blinking: TC-net 100 frame transmission is in execution.
OFF: TC-net 100 transmission is under suspension.
Blinking
TN-B
LINK
(green)
Displays the TC-net 100 B system link state (JTNI62 only).
ON: Connected to the hub successfully.
OFF: Not connected to the hub.
ON
TN-B
ACT
(green)
Displays the TC-net 100 B system frame transmission state
(JTNI62 only).
Blinking: TC-net 100 frame transmission is in execution.
OFF: TC-net 100 transmission is under suspension.
Blinking
EN
LINK(green)
(Reserved)
None
None
TN-B
ACT(green)
(Reserved)
None
None