Chapter 7 Application Interface
6F8C1621
7.2.4 Configuration of RAS information
In the RAS information area, the information for all nodes is shared. The
state information of each node is updated periodically, which consists of 64
words per node.
The configuration information depends on the node type. The information of
each node is expanded at the position of the station number x 128 bytes from
the beginning of the RAS information area by 64 words.
Figure 7-8 shows the configuration of the information provided by TN8 and
JTNI.
No.
F 8 7 0
cycle
Remarks
-
・
・
・
・
(Note 1)
:
Module Type 23H
:
TN8
、
4
:
JTNI
Figure 7-8 Configuration of RAS information