Toshiba nv-pack Series - Table of Contents

Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
ix
Chapter 1
Introducing the
JTNI
...1
1.1 Functions and Characteristics of the JTNI ················ 2
1.2 Names and Functions of the Parts ··························· 4
1.2.1 Names of the parts ·············································· 4
1.2.2 Functions of the parts ··········································· 5
Chapter 2
Installation and
W
iring
...7
2.1 Installation (Installation to the extended slot) ············ 8
2.2 Connecting the TC-net 100 Cable ·························· 10
Chapter 3
Setting
...11
3.1 Switch Setting ·················································· 12
3.1.1 Station address setting switch
(STN-H, STN-L) ················································ 12
3.1.2 Operation mode setting switch (MODE) ·················· 13
3.2 Network Parameter Setting ··································· 14
3.2.1 Network ID and subnet mask ······························· 14
3.2.2 Station address ················································· 15
3.2.3 Overview of multicast address ······························ 15
3.3 Setting with the Engineering Tool ·························· 17
3.3.1 Network parameter setting ··································· 18
3.3.2 Setting the scan talker blocks ······························· 29
3.4 Network Information ··········································· 33
3.4.1 Referring to scan healthy map ······························ 33
3.4.2 Accessing the scan data ····································· 34
3.4.3 Clearing the scan unhealthy state ·························· 34
3.4.4 Clearing the overlapping sending SA ····················· 34
3.4.5 LAN management information ······························ 35
3.4.6 Detailed explanation of LAN management information 36
3.4.7 Receiving line switching ······································ 37
3.4.8 Viewing the in-ring map······································· 38
3.5 Option Functions (Reserved) ································ 39
3.5.1 Setting the self healthy mode parameters ················ 39
3.6 Setting the RAS Information Block in Scan
Transmission ····················································· 41
CONTENTS