Chapter 3 Setting
6F8C1621
Word length: Specify the number of words used in the block.
Transmission speed: Specify the transmission speed of the block in High,
Medium, or Low. The maximum number of items with
each of the transmission speeds are High: 64,
Medium: 128, and Low: 384.
Talker Node: Specify the transmission module that sends the block.
Source controller: Specify the controller that uses the block.
Specify the source of the block, in PLC or Linux from CPU,
or TNI61, TNI62 from extended card, that is in the typeFR
unit.
Figure 3-19 An example of scan talker block registration
To Next Page
Loading...
