Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
This manual describes the functions, methods of installation and setting, and maintenance
and inspection of the TC-net 100 (JTNI) extended card ("JTNI" hereafter) for connecting the
information/control network TC-net 100 to the Unified Controller nv-pack series.
To use this device correctly, read "Safety precautions" first.
The manuals related to the JTNI are as follows.
• Unified Controller nv-pack series typeFR Operation Manual (6F8C1379)
Describes the main unit connection, maintenance of the typeFR controller.
• Unified Controller nv-pack series typeFR PLC CPU Function Manual (6F8C1616)
Describes the functions and basic use of the typeFR PLC CPU.
• Unified Controller nv series/Integrated Controller V series Command Manual
(6F8C1226)
Describes the detailed specifications of the instruction words of the program languages
(LD, FBD, and SFC) supported by the nv series and Integrated Controller V series.
• Unified Controller nv series/Integrated Controller V series nV-Tool (Basic)
Operation Manual (6F8C1290)
Describes how to create, debug, print, and save programs using nV-Tool.
• Unified Controller nv-pack series TC-net 100 extended card Manual
(6F8C1621) (This document)
Describes the TC-net 100 (JTNI) extended card of the typeFR.
After reading the manual, place it in a location that can be accessed easily when necessary.
To Next Page
Loading...
