4.6 Memory module 4 Replacement Procedures
4.6 Memory module
Removing the Memory module
To remove the memory module, confirm that the computer is shut down. Then follow the
steps below and refer to Figure 4-5 and 4-6.
CAUTION: When removing the memory module, make sure the computer is powered off.
Removing a memory module with the power on might damage the module or
the computer itself.
Do not touch the connectors on the memory module or on the computer.
Dust and stains on the connectors may cause memory access problems.
Never press hard or bend the memory module.
1. Loosen the screw fixing the memory cover.
2. Remove the memory cover.
Memory cover
Screw
Figure 4-5 Removing the memory cover
PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-15
To Next Page
Loading...
