4.11 Bluetooth module 4 Replacement Procedures
4.11 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-11.
1. Remove the following screw and lift up the Bluetooth module.
• M2×3B S-THIN HEAD ×1
2. Disconnect the Bluetooth antenna cable and Bluetooth FFC from the connectors on
the back of the Bluetooth module.
Bluetooth module
Bluetooth antenna cable
Bluetooth FFC
M2x3B S-THIN HEAD
Figure 4-11 Removing the Bluetooth module
PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-25
To Next Page
Loading...
