Toshiba PORTEGE A600 - Wireless Lan Card

4.9 Wireless LAN card 4 Replacement Procedures
4.9 Wireless LAN card
Removing the Wireless LAN card
To remove the wireless LAN card, follow the steps below and refer to Figure 4-9.
1. Turn up the insulator and disconnect three (or two) wireless LAN antenna cables
from the connectors on the wireless LAN card.
2. Remove the following screws and disconnect the wireless LAN card from the
connector on the system board.
• M2×4C BIND screw ×2
Wireless LAN card
M2×4C BIND
Insulator
Wireless LAN antenna cable (white)
Wireless LAN antenna cable (black)
Figure 4-9 Removing the wireless LAN card
PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-21