4 Replacement Procedures 4.9 Wireless LAN card
4-22 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710)
Installing the Wireless LAN card
To install the wireless LAN card, follow the steps below and refer to Figure 4-9.
1. Insert the wireless LAN card to the connector on the system board slantwise and
press it to connect firmly.
2. Secure the wireless LAN card with the following screws.
• M2×4C BIND screw ×2
3. Connect three (or two) wireless LAN antenna cables to the connectors on the
wireless LAN card.
4. Arrange the wireless LAN antenna cables and secure them with the insulator.
NOTE: Connect the white cable to “Main” and black cable to “Aux” marked on the
wireless LAN card.
To Next Page
Loading...
