4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem 4 Replacement Procedures
5. Remove the following screws securing the MDC modem.
• M2×4C BIND ×2
6. Turn up the insulator and take out the RJ11 harness from the slot.
7. Disconnect the MDC modem from the connector on the MDC FPC.
8. Disconnect the RJ11 harness from the connector on the MDC modem.
9. Remove the dummy ODD.
MDC modem
RJ11 harness
M2x4C BIND
MDC FPC
Insulator
Guide
Dummy ODD
Figure 4-15 Removing the MDC modem
PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-29
To Next Page
Loading...
