4.13 3G card 4 Replacement Procedures
PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-33
Installing the 3G card
To install the 3G card, follow the steps below and refer to Figure 4-17.
1. Connect the 3G FPC to the connector CN2750 on the system board and secure it
with following screws.
• M2×4C BIND screw ×3
2. Insert the 3G card to the connector on the 3G FPC slantwise.
3. Press the 3G card down and secure it with the following screws.
• M2×3B S-THIN HEAD screw ×2
4. Connect the 3G antenna cables to the connectors on the 3G card.
5. Arrange the 3G antenna cables in place.
To Next Page
Loading...
