4 Replacement Procedures 4.25 Keyboard
4-66 [CONFIDENTIAL] PORTÉGÉ A600 Maintenance Manual (960-710)
Installing the Keyboard
To install the keyboard, follow the steps below and refer to Figure 4-37.
NOTE: Do not reuse the removed keyboard and insulator. Use new keyboard and
insulator (INSULATOR KB).
Wipe off the double-sided tapes left on the cover assembly and stick new double-
sided tapes.
1. Wipe off the double-sided tapes left on the cover assembly.
2. Stick a new insulator (INSULATOR KB) on the cover assembly.
3. Stick a new keyboard on the insulator.
4. Stick the aluminum tape in place.
To Next Page
Loading...
