4.29 Hinge 4 Replacement Procedures
4.29 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-42.
1. Remove the following screws securing the hinges.
• M2×6C S-THIN HEAD ×2
• M2×2.4C S-THIN HEAD ×2
2. Remove the hinges (right and left) and key plate from the LCD cover.
Hinge L
Hinge R
M2x6C S-THIN HEAD
M2x6C S-THIN HEAD
LCD cover
M2x2.4C S-THIN HEAD
M2x2.4C S-THIN HEAD
Key plate
Figure 4-42 Removing the hinge
PORTÉGÉ A600 Maintenance Manual (960-710) [CONFIDENTIAL] 4-83
To Next Page
Loading...
