User’s Manual 4-23
Operating Basics
6. Grasp the optical media drive and slide it out.
Figure 4-17 Removing the optical media drive
Inserting a module
Insert the Ultra Slim Bay HDD adaptor as described below.
1. Insert the Ultra Slim Bay HDD adaptor in the computer as shown below
and press until the ejector clicks.
2. If you want to lock the Ultra Slim Bay HDD adaptor, set the Ultra Slim
Bay lock screw in the hole for the lock position.
Figure 4-18 Inserting the Ultra Slim Bay HDD adaptor
■ The optical media drive and other Ultra Slim Bay modules can become
hot with use. Be careful when removing the module.
■ Store the DVD Super Multi drive unit in the Ultra Slim Bay Case when
removing it from the computer or transporting it.
Ultra Slim Bay
lock screw
(unlock position)
Optical media drive
Ultra Slim Bay latc
To Next Page
Loading...
