Toshiba PORTEGE M400 - Method 3: Changing the Screen Orientation Using Task Bar; Using Accelerometer Utilities

4-12 User’s Manual
Operating Basics
Method 3: Changing the screen orientation using Task Bar
1. Right click “Change tablet and pen settings” icon in the Task Bar. Click
“Change screen orientation” from the menu.
The screen orientation is set to change in the following order when
purchased.
You can change the above sequence in the following procedure:
1. Double click Change tablet and pen settings icon in the Task Bar.
2. Click Change button in Display tab.
3. Select “changing the screen” from the Screen Orientation pull down
menu and change the screen.
Using Accelerometer Utilities
You can set the orientation of the desktop screen just after rotating the
display from [Start]-[All Programs]-[TOSHIBA]-[Tablet PC]-[TOSHIBA
Rotation Utility]
When you shake the computer:
■ Do not shake the computer too strongly.
If so, the computer may drop from your hands or hit persons or things
around.
■ Avoid using the computer in crowded places. (e.g. in commuter trains
or in busy streets)
■ This may cause injury to a child or adult, and damage to the computer.
When HDD protection function is on and the Tilt function (function to start
applications, etc. by waving the computer vertically or horizontally) is used,
the HDD protection message may be displayed on the screen. Set the
HDD protection function to off in order to stop such messages from
displaying.