User’s Manual 4-13
Operating Basics
It is safe that you hold the computer with both hands horizontally as shown
in the example.
Figure 4-15 Shake the computer
Changing to the laptop mode
To change the Tablet mode to the laptop mode, follow the instructions
below.
1. Press the Display latch and raise the display to the upright position
carefully.
2. Rotate the display counter-clockwise slowly.
3. Turn the display latch toward you for the next closing of the display.
Using the Fingerprint Sensor
This product has a fingerprint utility installed for the purpose of enrolling
and recognizing fingerprints. By enrolling the ID and password to the
fingerprint authentication device, it is no longer necessary to input the
password from the keyboard. Just by swiping the finger against the
fingerprint sensor, the following functions will be enabled:
■ Logon to Windows and access a security-enabled homepage through
IE (Internet Explorer).
■ Files and folders can be encrypted/decrypted and third party access to
them prevented.
■ Disable the password-protected screen-saver when returning from
power-saving (standby) mode.
■ Power-on Security and Single Sign-on feature.
■ Authentication of the User Password and Hard Disk Drive Password
when booting up the computer.
The computer is shaken perpendicularly.The computer is shaken horizontally.
To "swipe" refers to the action of reading a fingerprint using the fingerprint
sensor.
To Next Page
Loading...
