6-14 User’s Manual
Power and Power-Up Modes
1. Save your work.
2. Turn the computer’s power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Close the LCD display panel and turn the computer upside down.
5. Slide the battery safety lock towards the release ( ) position to make
the battery release latch movable.
Figure 6-1 Releasing the battery pack (1)
6. Slide the battery release latch (➀) to free the battery pack for removal
(➁), then slide out the battery pack.
Figure 6-2 Releasing the battery pack (2)
To install a battery pack, follow the steps below.
Battery pack
Battery
release latch
Battery lock
Battery
release latch
Battery pack
Do not touch the battery release latch while holding the computer. Or you
may get injured by the dropped battery pack by unintentional release of the
battery release latch.
To Next Page
Loading...
