4 Replacement Procedures 4.14 Base assembly and Cover assembly
3. Stand the display 90 degrees.
4. Turn the display clockwise 90 degrees and remove the following screws.
M2.510.0B FLAT HEAD screw 2
5. Remove the hinge rear cover.
M2.5
10.0B FLAT HEAD
Hinge rear cover
Figure 4-25 Removing the base assembly and cover assembly (2)
4-42 [CONFIDENTIAL] PORTÉGÉ M780 Maintenance Manual (960-809)
Downloaded from LpManual.com Manuals
To Next Page
Loading...
