Toshiba Portege M780 - Page 352

4.14 Base assembly and Cover assembly 4 Replacement Procedures
6. Return the display counterclockwise in the original position, close the display and
turn over the computer.
7. Remove the following screws.
 M2.516.0B FLAT HEAD screw 3 (“16” in the figure below)
 M2.56.0B FLAT HEAD screw 10 (“6” in the figure below)
8. Separate the base assembly and cover assembly.
16
6
16
6
6
6
6
6
6
6
16
6
6
Base assembly
Cover assembly
Figure 4-26 Removing the base assembly and cover assembly (3)
PORTÉGÉ M780 Maintenance Manual (960-809) [CONFIDENTIAL] 4-43
Downloaded from LpManual.com Manuals