30
7. The login screen will appear. Enter your password and click OK.
The Drive will mount, and the drive icon/letter for your Toshiba Drive
will appear in My Computer under Hard Disk Drives.
You will also see a CD-ROM icon/letter under Devices with
Removable Storage. This is the CD partition used to store the
Password Security software.
Disabling Password Security
You can disable or enable Password Security at any time. Doing so will
not affect any data stored on your Drive. If you disable Password Security,
then later on decide to re-enable it, you will have to run through the
enabling procedure and create a password and password hint.
How to disable Password Security
1. In the login screen, click on the Options button.
2. Check Disable Password Security.
3. In the Current Password field, enter the current password. If this is
your first time connecting the Drive to your computer, enter 12345
(this is the default password set at the factory).
4. Click OK. You will see a message telling you to unplug and plug
in the device. Click OK, then unplug and plug in the USB cable
connected to your computer.
To Next Page
Loading...
