Toshiba Qosmio DX730 Series User Manual

HW Setup
This section explains how to use the TOSHIBA HW Setup program to
configure your computer, and provides information on settings for various
functions.
Accessing HW Setup
To run the HW Setup program, click Start -> All Programs ->
TOSHIBA ->
Tools & Utilities -> HWSetup.
HW Setup window
The HW Setup window contains a number of tabs (General, Password,
Boot Setting and LAN) to allow specific functions of the computer to be
configured.
In addition there are also three buttons : OK, Cancel and Apply.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
General
This window displays the BIOS/EC version and contains two buttons :
Default and About.
Default Return all HW Setup values to the factory
settings.
About Display the HW Setup version.
Setup
This field displays the installed BIOS version, date and EC version.
Password
This option allows you to set or reset the user password for power on.
User Password
Lets you register a new password or change/remove an existing password.
Not Registered Changes or remove the password. (Default)
Registered Selects the password. A dialogue box will appear
to allow you to set the password.
To enter a user password:
TOSHIBA DX730/DX735/Qosmio DX730 Series
User's Manual 4-16

Toshiba Qosmio DX730 Series Specifications

General

Brand	Toshiba
Model	Qosmio DX730 Series
Category	Desktop
Language	English