144
Utilities
Setting passwords
Using a supervisor password
A supervisor password prevents other users from changing
hardware configuration options.
Setting a supervisor password
If you choose to set a supervisor or user password, Toshiba strongly
recommends that you save your password in a location where you
can later access it should you not remember it.
Toshiba is not responsible for any losses that may occur to you, your
organization or others as a result of the inability to access your
computer.
To set a supervisor password:
1 Click Start, All Programs, To shiba, Utilities, and then
TOSHIBA Assist.
The TOSHIBA Assist window appears.
2 On the left side, click the Secure tab.
3 Click the Supervisor Password icon.
The Supervisor Password Utility window appears.
(Sample Image) Supervisor Password tab
4 Select Registered, then click OK.
A pop-up screen appears asking for a password.
5 Enter your password, and then enter it again to verify.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
