How to stop water leakage from Toshiba RAD-X200H Dehumidifier?
If your Toshiba Dehumidifier is leaking water, check that the drain hose is securely attached. Also, inspect the drainage system for any blockages and unclog the hose if necessary.
Why is my Toshiba Dehumidifier frosted up?
If your Toshiba Dehumidifier is frosted up, it may be due to a low ambient temperature, which activates the defrost operation. This is not a malfunction; the defrosting operation could be activated by the Drying Inside Operation.
What to do if Toshiba RAD-X200H Dehumidifier has poor dehumidification results?
If your Toshiba Dehumidifier isn't dehumidifying effectively, it could be due to low room temperature or humidity, which reduces its performance. Also, check the air outlet and air intake for any obstructions and remove them.
Why my Toshiba RAD-X200H does not operate?
If your Toshiba Dehumidifier isn't turning on, first ensure the power cord is fully plugged into the power socket. Also, check if the water tank is full or not properly inserted; empty it and re-insert it correctly. Finally, verify that the room temperature is within the recommended range of 5-32°C, as the unit may not operate outside this range.
How to fix abnormal operating noises in Toshiba RAD-X200H Dehumidifier?
If your Toshiba Dehumidifier is making unusual noises, make sure it's placed on a stable, level surface. Check and clear any blockages from the air intake. Note that the sound of flowing water is normal, as it's due to the refrigerant moving inside the unit.
What to do if no air comes out of Toshiba RAD-X200H?
If no air is coming out of your Toshiba Dehumidifier, the air intake might be blocked. Clear any items obstructing the air intake.
General| Water Tank Capacity | 4.5 Liters |
|---|---|
| Moisture Removal Capacity | 20 liters/day |
| Dehumidification Capacity | 20L/day |
| Operating Temperature Range | 5°C to 35°C |
| Noise Level | 48 dB(A) |
To Next Page
