Toshiba TDDP2012ES2C - User Manual

Questions and Answers

J
Jessica AlvaradoAug 11, 2025
Why is my Toshiba TDDP2012ES2C Dehumidifier not drying the air properly?
- S
  sharon90Aug 11, 2025
  If your Toshiba Dehumidifier isn't drying the air as expected, consider these points: * Allow sufficient time for moisture removal. * Ensure curtains, blinds, or furniture aren't blocking the front or back of the unit. * The humidity control setting may be too high. * Verify that all doors, windows, and other openings are securely closed. * The room temperature may be too low (below 5°C or 41°F). * Check for sources of water vapor in the room, such as a kerosene heater.
H
Henry NewmanAug 16, 2025
What to do if there is water on the floor near my Toshiba Dehumidifier?
- S
  scottdianeAug 16, 2025
  If you find water on the floor near your Toshiba Dehumidifier, check the following: * Ensure the hose and its connections are secure and not loose. * If you're using the bucket to collect water, make sure the back drain plug is properly installed.
V
Valerie BlairAug 22, 2025
Why does frost appear on the coils of my Toshiba TDDP2012ES2C?
- J
  jeremyhenryAug 22, 2025
  The appearance of frost on the coils of your Toshiba Dehumidifier is normal. It indicates that the unit's auto-defrost feature is working.
J
Joshua RogersAug 29, 2025
What to do if my Toshiba TDDP2012ES2C Dehumidifier does not start?
- T
  twagnerAug 29, 2025
  If your Toshiba Dehumidifier isn't starting, here are a few things to check: * Ensure the dehumidifier's plug is fully inserted into the outlet. * Inspect the house fuse or circuit breaker box. * The dehumidifier might have reached its preset level, or the bucket could be full. * Make sure the water bucket is correctly positioned.
B
barry38Sep 3, 2025
How to reduce loud noise from my Toshiba TDDP2012ES2C?
- M
  Matthew CastilloSep 3, 2025
  If your Toshiba Dehumidifier is making loud noises, try these solutions: * Check if the air filter is clogged. * Ensure the unit is upright and not tilted. * Make sure the floor surface is level.