Toshiba RAS-10SAVP-ND - COOLING AND HEATING MODES; Starting Cooling;Heating; Stopping Cooling;Heating; DRY OPERATION MODE

9 EN
FRANÇAISDEUTSCHSVENSKAРУССКИЙ ЯЗЫКSUOMIDANSKNORSK ENGLISH
Start
a button
Press this button to start the air conditioner.
b Mode select button (MODE)
Select COOL or HEAT .
c Temperature button ( )
Set the desired temperature.
d Fan speed button (FAN)
Select one of “AUTO” LOW , LOW+ , MED , MED+ ,
HIGH .
• The OPERATION indicator (green) on the display panel of the indoor unit turns on.
Operation starts after approximately 3 minutes.
Stop
button
Press this button again to stop the air conditioner.
Start
a button
Press this button to start the air conditioner.
b Mode select button (MODE)
Select DRY .
c Temperature button ( )
Set the desired temperature.
• The fan speed setting is fixed to AUTO and the AUTO is displayed.
• The OPERATION indicator (green) on the display panel of the indoor unit turns on, and
operation starts after approximately 3 minutes.
Stop
button
Press this button again to stop the air conditioner.
COOLING/HEATING OPERATION
DRY OPERATION
a
b
c
d
TEMP
a
b
c
TEMP
A1YPGTU/CPWCNA'0HO2CIG9GFPGUFC[,CPWCT[2/