Need help?Do you have a question about the Toshiba RAS-10UKHP-ES4 and is the answer not in the manual?
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| EER | 3.21 |
| COP | 3.61 |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Indoor Unit Weight | 9 kg |
| Outdoor Unit Weight | 23 kg |
| Type | Air Conditioner |
Illustrates the dimensions and layout of the outdoor units for different models.
Details the physical structure and dimensions of the indoor unit.
Illustrates the dimensions and layout of the outdoor unit for the 07UA-ES4 model.
Electrical schematic for specific indoor/outdoor unit models.
Electrical schematic for specific indoor/outdoor unit models.
Electrical schematic for specific indoor/outdoor unit models.
Electrical schematic for specific indoor/outdoor unit models.
Lists electrical components for various indoor unit models.
Lists electrical components for various outdoor unit models.
Diagram showing refrigerant flow for specific cooling/heating operations.
Diagram showing refrigerant flow for specific cooling/heating operations.
Diagram showing refrigerant flow for specific cooling/heating operations.
Diagram showing refrigerant flow for specific cooling/heating operations.
Diagram showing refrigerant flow for specific cooling/heating operations.
Overview of the control system logic and components.
Overview of the control system logic and components.
General explanation of how the air conditioner control system functions.
Details on operational logic and basic modes like Fan, Cooling, Dry, Heating, Auto.
Explains Hi Power, temperature limit, and low-temperature limit controls.
Covers auto restart, filter check, self-cleaning, quiet, and comfort sleep modes.
Crucial safety guidelines and warnings for installing the unit.
Visual guide for positioning and installing indoor and outdoor units.
Lists necessary accessories, parts, specialized tools, and electrical work guidelines.
Step-by-step guide for installing the indoor unit, including placement and fixing.
Guide for selecting outdoor unit location and connecting piping/drainage.
Instructions for connecting electrical wiring and setting up the remote control.
Covers gas leak testing and test operation procedures.
Initial steps and basic checks for diagnosing unit issues.
How the unit self-diagnoses and identifies common failures.
Using the remote control to access diagnostic codes and troubleshoot.
Step-by-step diagnostic guides for common operational failures.
Procedures for troubleshooting issues related to the remote control.
Detailed instructions for disassembling and replacing indoor unit components.
Detailed instructions for disassembling and replacing outdoor unit components.
Visual breakdown of indoor unit components with part numbers.
Visual breakdown of outdoor unit components with part numbers.
To Next Page