Need help?Do you have a question about the Toshiba RAS-10UKV-E and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-10UKV-E |
| Category | Air Conditioner |
| Language | English |
Details electrical and physical specifications for indoor and outdoor units, including capacity and dimensions.
Graphs illustrating current vs. compressor speed for cooling and heating modes.
Charts showing how cooling and heating capacity changes with outdoor temperature.
Essential safety guidelines for handling R-410A refrigerant during installation and servicing.
Instructions for installing refrigerant piping, including material selection and processing.
Lists tools exclusive for R-410A and general tools required for installation and servicing.
Step-by-step guide for recovering and recharging refrigerant in the system.
Details on brazing materials, flux, and methods to prevent oxidation.
Diagrams showing the dimensions and components of the indoor unit.
Diagrams illustrating the dimensions and components of the outdoor unit.
Schematic showing the electrical connections within the indoor unit.
Schematic illustrating the electrical connections within the outdoor unit.
Lists and specifications for electrical components used in the indoor unit.
Lists and specifications for electrical components used in the outdoor unit.
Diagram illustrating the flow of refrigerant through the system.
Provides operating data like pressure, temperature, and fan speeds for cooling and heating.
Block diagram showing the control functions and signal flow for the indoor unit.
Block diagram detailing the control functions of the outdoor unit's inverter assembly.
Describes the overall control logic between indoor and outdoor units.
Explains the function of various operation circuits like cooling, heating, and dry modes.
Details on how to use Temporary Auto and Temporary Cooling operations.
Instructions for setting and canceling the auto restart function after power failure.
Explains the function of the Hi POWER mode for enhanced cooling or heating.
Information on the filter check lamp and how to reset it after cleaning.
Description of remote control buttons, functions, and display indications.
Important safety warnings and precautions for installing the air conditioner.
Detailed steps for installing the indoor unit, including placement and mounting.
Guidelines for selecting the installation place and connecting the outdoor unit.
Basic checks for power supply and voltage to confirm initial operational status.
Methods for initial fault judgment using LED indicators and remote control.
Table correlating indoor unit LED blinking patterns with specific fault causes.
Instructions on using the remote control in service mode to retrieve check codes.
Flowcharts for diagnosing common symptoms like no power or fan motor issues.
Diagnostic procedure for specific error codes related to sensor and gas leakage.
Flowchart for diagnosing issues within the outdoor unit's inverter assembly.
Procedures for checking the P.C. board, sensors, and other key components.
Simple steps to determine if the outdoor fan motor is functioning correctly.
Step-by-step instructions for replacing components of the indoor unit.
Procedures for disassembling and replacing parts of the outdoor unit.
Exploded view and parts list for the indoor unit's electronic components.
Exploded view showing all parts of the indoor unit with corresponding numbers.
Exploded view illustrating all components of the outdoor unit with part numbers.
Exploded view and parts list for the outdoor unit's electronic components.
To Next Page