Item
16. Short Timer
Operation flow and applicable data, etc.
Description
In the normal condition, after switching one circuit
breaker, 3-minute delay time for compressor and
1 hour for plasma air purifier are set for the
maintenance of the unit.
Purpose
To start the unit immediately for the purpose of
testing, trial...etc, short timer can be used.
maintenance of the unit.
Short Timer Setting
purifier on the remote control without
[CHK] button and hold, "00" will show
to make "00" disappear.
setting on the remote operates
front panel turns ON continuously for
j
Press [ ] button to turn the unit OFF.
k Set the operation mode or plasma air
sending the signal to the unit.
l Use the tip of the pencil to push the
on display, them press [CLR] button
m
Press [ ] button to turn the unit ON.
n When short timer is activated, all
immediately, besides, all indicatiors on
3 seconds.
− 43 −
FILE NO. SVM-08011
17. FILTER When the elapsed time reaches 1000 hours the
Indicator
FILTER indicator lights.
After cleaning the filters, turn off the FILTER indicator.
How to Turn Off FILTER Indicator
Press [RESET] button on the indoor unit.
NOTE :
If [RESET] button is pushed while the FILTER indicator
is not lit, the indoor unit will start the automatic
operation.
When you want a temporary operation while the
FILTER lamp lights, press [RESET] button to turn off
the FILTER lamp.
To Next Page
Loading...
