Toshiba RAS-167SAV-E - Name and Functions of Indications on Remote Controller

– 48 –
9-4-3. Name and Functions of Indications on Remote Controller
[Display]
FILE NO. SVM-08011
All indications, except for the clock time indicator, are displayed by pressing the button.
1. Transmission mark
This transmission mark
indicates when the
remote controller transmits signals to the indoor
unit.
2. Mode indicator
Indicates the current operation mode.
(AUTO, COOL, DRY and HEAT)
3. Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
4. ECO indicator
Indicates when the ECO is in activated.
Press the ECO button to start and press it again
6. Operation
Indicate when press the operation ON/OFF
button.
to stop operate.
5. A, B change indicator remote controller
When the remote controller switching function is
set, "B" appears in the remote controller display
(When the remote controller seting is "A", there is
no indication at this position.)
7. FAN speed indicator
Indicates the selected fan speed.
AUTO, QUIET or three fan speed levels
( LOW , MED , HIGH ) can be shown.
Indicate Auto will be appear with Dry operation
only.
8. ON/OFF TIMER indicator
Indicate when the ON/OFF TIMER operation.
(ON TIMER [Hr. ON], OFF TIMER [OFF]).
1
3
4
2
Hr.ON OFF
•
•
•
•
•
•
•
B
•
6
5
8
7
HEAT